Bmw Inpa / Ediabas Kdcan Usb Driver

| 24-05-2021
[RAND-1-100] Comments

An idiots guide to BMW INPA installation with a modded USB Vagcom. To BMW INPA installation with a modded USB Vagcom. Minimum select INPA,EDIABAS and NCS.

Inpa Ediabas 6.4.3 And 4.4.7

If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it.

Disclaimer:
I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk.

Pre-installation caution:
Here are the INPA driver & software, free download links. If the driver/software is working, then ignore the next part. Otherwise take a look at the following part for reference.
INPA Driver: http://www.obd2vip.com/download/inpa-driver.zip（Close antivirus software or set your browser to download success）
INPA software: http://www.obd2vip.com/download/inpa-2.zip

Procedure:

Bmw Inpa / Ediabas Kdcan Usb DriverBmw Inpa / Ediabas Kdcan Usb Driver

1. Open your Device Manager. Control Panel–Hardware & Sound–Device Manager.
2. Connect the INPA K+DCAN cable with computer/PC-Double click
3. Locate USB Serial Converter->DetailsDropdown Menu->Hardware IDs. The PID number is the one you want. Will most likely be 0000.
4. Download CDM v2.08.30
http://www.ftdichip.com/Drivers/CDM/CDM%20v2.08.30%20for%20Windows%208.1.zip

5. Disable “Driver signature verification” Settings–Change PC Settings–Recovery–Advanced Startup–Restart.
This will restart your PC to Advanced settings. From there: Troubleshoot–Advanced Options–Startup Settings–Restart–F7

Follow these picture guides:
Your PC will then restart with signature verification disabled. You are now able to edit the INPA drivers.

6. Unzip the Drivers file that you just downloaded and open up

7. Open ftdibus.inf
8. Replace every PID_6001 with PID_0000 to match your hardware ID. Scan through the whole document. Then save it.
9. Then find ftdiport.inf. Do the same to ftdiport.inf

10. Back in your Device Manager double click on your OBDII cable again.
Locate USB Serial Convertor Properties->Driver->Update Driver-> Browse my computer.
Locate your driver and install. You will need to install it for both USB Serial Converter and Ports & COM.

11. Setup INPA cable as normal and run INPA software.

It seems that the white FTDI chip INPA cables have to be manually put into D-CAN mode. This file will take care of that. It is normal for the LED to go out.
http://www.mediafire.com/download/35fnrnd3q3dvf3w/D-CAN.exe
If you put the cable into DCAN mode, the LED goes off, and it says there is no adapter connected. Please connect it to the car and run the DCAN mode.

Who Viewed This Article Also Views:

Other Automotive Diagnostic Service Tools

When you see your check engine light come on, use a device that can diagnose the issue. These code reader and scanning tests usually plug into the OBD-II port, which is located under your dashboard. Once you've plugged in the OBD-II scanner, simply enter your vehicle data for information regarding the state of your engine, transmission, and emissions; you can also program keys or clear key memories.

What on-board diagnostic tools and protocols are available?
  • OBD: The OBD interface was originally designed solely for California in order to give manufacturers a push towards efficient emission systems.
  • OBD-II: Required for all autos sold after 1996, the OBD-II scanner uses a standardized connector to scan the systems. Readouts also have universal standards for the OB-II protocol.
  • EOBD: Since 2001, European petrol cars have used this standard for their diagnostic tools, which is their OBD-II equivalent. Commercial and diesel vehicles sold after 2004 were required to have diagnostic protocols as well.
What other vehicles can an OBD-II scanner test?

Bmw Inpa / Ediabas K+dcan Usb Driver

  • ATV: When it's time to go 4-wheeling, keep your ATV in top shape by testing and correcting the issues beforehand.
  • Motorcycle: While the OBD-II scanner protocol is not a requirement for motorcycles, many models have their own equivalent protocol of CAN BUS.
  • Heavy-duty: Commercial diesel trucks require OBD-II protocols.

Bmw Inpa / Ediabas K+dcan Usb Interface Ebay

Can you use the OBD-II scanners to correct mileage errors?

While automotive dealers are not allowed to sell autos with changed mileage in order to fraudulently reflect low mileage, you are able to correct errors in mileage using a diagnostic tool. Your vehicle may display an asterisk or some other notification by the mileage to reflect the change. You'll just want to make sure you're not using the code reader to perform this action to sell the car fraudulently or extend a warranty.

How do the scanners record the diagnostic results?

The OBD-II scan tools will display the error code on the scanner's display face, which is then used to find the proper diagnosis. The scan uses software that is capable of being saved on an external storage device if necessary. Some models will also have Bluetooth compatibility to transfer readouts to an iPhone or Android device. When code errors are fixed, these diagnostic devices have the ability to reset codes in your car and stop error lights. Scanners have a built-in memory to keep track of recurring trouble code issues in a vehicle.